Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Radiator Replacement Instructions

Model: Chevrolet Aveo MK 1, T200 - Years 2002-2011
Part: Radiator

To remove and replace a damaged radiator, it is advisable to carry out this operation when the engine is cold to avoid unpleasant burns, and first disconnect the power connector of the cooling fan and remove it (you will also need to remove the fixing pins of the power steering oil reservoir). Once the fan is removed, disconnect the radiator hoses, drain the coolant, and unscrew the fixing bracket bolts to extract it from its housing. At this point, working in reverse, install the new radiator and fill the system with the appropriate coolant.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Removing the Clutch from a Chevrolet Aveo 1.2 Petrol
Instructions for Removing the Clutch from a Chevrolet Aveo 1.2 Petrol
Chevrolet Aveo (2002-2011 / MK 1, T200) Today, you will learn the main instructions on how to remove and replace the clutch assembly of a Chevrolet Aveo 1.2 petrol. First, open the bonnet a…
How to Replace the Starter Motor on a Chevrolet Aveo
How to Replace the Starter Motor on a Chevrolet Aveo
Chevrolet Aveo (2002-2011 / MK 1, T200) Follow this guide for the disassembly and replacement of the starter motor on the Chevrolet Aveo in simple steps. First, open the bonnet of the vehic…
Front Shock Absorber Replacement Instructions
Front Shock Absorber Replacement Instructions
Chevrolet Aveo (2002-2011 / MK 1, T200) To replace the front shock absorber, you first need the appropriate tool (or clamps) to compress the spring. Start by lifting the vehicle on a ramp a…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos