Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Clutch from a Chevrolet Aveo 1.2 Petrol

Model: Chevrolet Aveo MK 1, T200 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Clutch

See other generations:
Video tutorial

Today, you will learn the main instructions on how to remove and replace the clutch assembly of a Chevrolet Aveo 1.2 petrol. First, open the bonnet and remove the battery by unscrewing the fixing screws of the bracket and disconnecting the two terminals (positive and negative).

Then, disconnect the wiring of the gearbox and the electrical connectors of the gearbox sensors to move them away. Lift the vehicle and drain the engine oil by opening the oil drain plug, then remove the left front wheel.

Now, remove the driveshaft to access the clutch assembly and unscrew the screws of the gearbox to access and replace it.


Updated on 15 April 2026 by ScegliAuto


Related tutorials

Where to Find the Fuses in the Chevrolet Aveo
Where to Find the Fuses in the Chevrolet Aveo
Chevrolet Aveo (2012-2020 / MK 2, T300) Follow this procedure to locate the fuse box in your Chevrolet Aveo. First, get into the car and take your seat in the driver's position. Next, focus…
How to Replace the Starter Motor on a Chevrolet Aveo
How to Replace the Starter Motor on a Chevrolet Aveo
Chevrolet Aveo (2002-2011 / MK 1, T200) Follow this guide for the disassembly and replacement of the starter motor on the Chevrolet Aveo in simple steps. First, open the bonnet of the vehic…
How to Replace the Spark Plugs on a Chevrolet Aveo
How to Replace the Spark Plugs on a Chevrolet Aveo
Chevrolet Aveo (2002-2011 / MK 1, T200) Before you can start, open the front bonnet of your Chevrolet Aveo. Begin by disconnecting the leads connected to the spark plugs by simply pulling t…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos