Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Shell of a Chevrolet Sail

Model: Chevrolet Sail MK 2 - Years 2010-2017
Part: Key

This video tutorial shows how to replace the key fob shell of a Chevrolet Sail. Take the key of your vehicle and with the help of a star screwdriver, unscrew the small screw located on the back of the shell. At this point, use the tip of a small flat screwdriver to pry at the edge, and you will be able to open the casing and extract the circuit containing the battery. Take the new shell and first insert the new buttons into the designated spaces, then insert the circuit extracted from the old key fob. Close it with the back cover and screw in the small locking screw.

Updated on 3 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Shell of the Chevrolet Sail Mk3 Remote
How to Replace the Shell of the Chevrolet Sail Mk3 Remote
Chevrolet Sail (2014-2023 / MK 3) This guide shows how to replace the protective shell of the Chevrolet Sail Mk3 remote. The first step is to remove the automaker's logo from the back…
How to remove the engine fuse box from the Chevrolet Sail MK1
How to remove the engine fuse box from the Chevrolet Sail MK1
Chevrolet Sail (2000-2009 / MK 1) In this video, we will see how to remove the fuse box located in the engine compartment of the Chevrolet Sail. This car is not common in Europe, as i…
How to Replace the Water Pump on a Chevrolet Sail?
Chevrolet Sail (2014-2023 / MK 3) To replace the water pump on a Chevrolet Sail, open the hood to access the components on the left side of the engine block. Once you locate the timin…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos