Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Rear Hatch Panel of the Chevrolet Equinox

Model: Chevrolet Equinox MK 1 - Years 2005-2009
Part: Door trim panel

Follow these brief instructions to remove and replace the rear hatch panel of the Chevrolet Equinox. First, open the trunk hatch and start by removing the two plastic side pillars located above the hatch. Next, unscrew the fastening screws found on the hatch itself, as shown in the video. At this point, gently pry on the sides to detach and remove the rear hatch panel, replacing it with a new one if necessary; apply the reverse procedure for reassembly!

Updated on 25 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Chevrolet Equinox (2010-2017 / MK 2) On the Chevrolet Equinox, the trunk lid may become stuck due to a malfunction in the control or the lock actuator. In such cases, you can perform an …
Chevrolet Equinox (2010-2017 / MK 2) Discover how to remove and replace the battery in the Chevrolet Equinox by following the instructions below. First, open the hood and start by removi…
Chevrolet Equinox (2010-2017 / MK 2) Below we will see the instructions that will allow us to disassemble and replace the rear light bulbs of the Chevrolet Equinox. First, let's open the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos