Do it yourself
Frequently asked questions about cars and motorcycles

How to Adjust the Handbrake on a Chevrolet Cruze MK1

Model: Chevrolet Cruze MK 1, J300 - Years 2009-2015
Part: Parking brake

In this video, you can see how to adjust the handbrake on a Chevrolet Cruze MK1: first, remove the glove compartment from the centre console to expose the handbrake adjustment mechanism located right underneath. Using a flathead screwdriver, push the spring forward so that it is fully under tension, and then adjust the screw by turning it clockwise to tighten (it is usually not necessary to loosen it further), until the handle has a maximum of three or four clicks, which are considered optimal for the tension of the handbrake lever.

Updated on 17 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Chevrolet Cruze (2009-2015 / MK 1, J300) Today's main steps will show us how to adjust the handbrake of the Chevrolet Cruze; to perform this operation, it is necessary that the rear brake pa…
Chevrolet Cruze (2009-2015 / MK 1, J300) In this tutorial, you will learn how to adjust the handbrake on a Chevrolet Cruze, a simple task to perform after replacing the rear brake pads. Firs…
Chevrolet Cruze (2009-2015 / MK 1, J300) The logic of operation of the handbrake of a car is almost identical among all models produced, and this also applies to the Chevrolet Cruze. It is e…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos