Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fuel flap on a Chevrolet Cruze?

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Fuel cap

See other generations:
Video tutorial

In this tutorial, you will see how to replace the fuel flap on a Chevrolet Cruze, a very simple and quick operation. First, open the flap using the designated control button, then grip it from both the top and bottom edges, hold the support arm steady, and pull it firmly towards you. Once unclipped, fully separate it, position the replacement, and press it firmly as well.

Finally, close the flap and check that it closes perfectly, maintaining an even gap from the bodywork along the entire perimeter.


Updated on 20 September 2026 by ScegliAuto


Related tutorials

Replacing the Fuel Pump on a Chevrolet Cruze
Replacing the Fuel Pump on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) The main steps today will show you how to remove and replace the fuel pump on a Chevrolet Cruze. First, lift the vehicle and begin removing the fuel …
How to Dismantle the Fuel Pump on a Chevrolet Cruze
How to Dismantle the Fuel Pump on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Today's instructions will show you how to dismantle and replace the fuel pump on a Chevrolet Cruze. To access the fuel pump, it will be necessary to …
Guide to replacing the fuel pump of the Chevrolet Cruze
Guide to replacing the fuel pump of the Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Below we will see the main steps that will allow us to disassemble and replace the fuel pump of the Chevrolet Cruze. First, we open the rear doors of…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos