Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery in the key of the Chevrolet Traverse

Model: Chevrolet Traverse MK 1 - Years 2009-2017
Part: Key

If you want to replace the battery inside the key of your first generation Chevrolet Traverse (2009-2017), just follow these steps. Fortunately, it is a very simple operation to perform and therefore within everyone's reach. First of all, take a flat screwdriver and use it to remove the back cover of the key in a few seconds. Once you have done this, also remove the old battery and replace it with a new one after making sure that it is perfectly compatible (CR2032 model). Finally, reassemble the back cover.

Posted on 26 June 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Key Battery of the Chevrolet Traverse 2
How to Replace the Key Battery of the Chevrolet Traverse 2
Chevrolet Traverse (2018-2025 / MK 2) This guide describes the entire procedure you need to follow to replace the small battery located inside the key of your second-generation Chevrolet …
How to Replace the Battery in a Chevrolet Traverse?
How to Replace the Battery in a Chevrolet Traverse?
Chevrolet Traverse (2009-2017 / MK 1) To replace the battery in a Chevrolet Traverse, remove the carpet located in the rear of the cabin, directly in front of the right passenger seat. On…
How to Replace the Key Battery in Your Chevrolet Traverse
How to Replace the Key Battery in Your Chevrolet Traverse
Chevrolet Traverse (2018-2025 / MK 2) To replace the battery in your Chevrolet Traverse key, you only need a small flathead screwdriver. Follow these steps. First, press the button locate…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos