Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Chevrolet Aveo

Model: Chevrolet Aveo MK 1, T200 - Years 2002-2011
Part: Door trim panel

Removing the door panel on this Chevrolet model is very straightforward. Start by obtaining a plastic bodywork spatula to unclip and remove the cover of the internal handle grip, beneath which are the only two screws securing the panel. Next, remove the trim around the opening lever and then the triangular cover located near the external mirror. Finally, pry along the edge of the panel to unclip the pressure fittings and complete the removal by disconnecting the window switch connector.

Updated on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Door Panel from a Chevrolet Aveo
Removing the Door Panel from a Chevrolet Aveo
Chevrolet Aveo (2002-2011 / MK 1, T200) Let's see how to remove the door panel from a Chevrolet Aveo. Remove the cover of the opening handle and unscrew the screws underneath with a screwdr…
Where is the fuse box of the Chevrolet Aveo
Where is the fuse box of the Chevrolet Aveo
Chevrolet Aveo (2002-2011 / MK 1, T200) In this mini guide dedicated to your Chevrolet Aveo first series (2002-2006), discover where the car's fuse box is located and how to access the fuse…
Where are the fuses located in the Chevrolet Aveo?
Where are the fuses located in the Chevrolet Aveo?
Chevrolet Aveo (2012-2020 / T300, MK 2) Thanks to the following procedure, you will be able to locate the fuse box in your Chevrolet Aveo on your own. First of all, you need to get into the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos