Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to deactivate the start and stop feature of the 2018 Chrysler Pacifica.

Model: Chrysler Pacifica MK 1 - Years 2017-2024

Today we will see how to disable the Start&Stop feature of the 2018 Chrysler Pacifica. To deactivate the automatic start and stop system when the vehicle is stationary, we need to remove the central panel of the car. We will use a flathead screwdriver or plastic trim removal tools. Insert the plastic tool into the lower part of the dashboard and the upper part to detach the radio control panel, being careful not to damage the central connector, pulling the block. To eliminate the Start&Stop system, we need to remove the safety module; disconnect the connector and unscrew the locking screws. After removing the connector, we insert the deactivation element, which can be purchased online, into its place. We then insert the safety module and secure it with a zip tie to the device. Finally, we reassemble the control panel. We will test the functionality of the deactivation system by driving the vehicle.

Posted on 11 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the Chrysler Pacifica located?
Where is the fuse box of the Chrysler Pacifica located?
Chrysler Pacifica (2017-2024 / MK 1) If you want to be able to independently find the box containing all the various fuses of your Chrysler Pacifica, all you have to do is follow this si…
How to Replace the Key Fob Battery for the 2017 Chrysler Pacifica
How to Replace the Key Fob Battery for the 2017 Chrysler Pacifica
Chrysler Pacifica (2017-2024 / MK 1) If you have a 2017 Chrysler Pacifica and want to learn how to properly replace the button battery in the key fob, read this guide carefully and follo…
How to replace the battery of the Chrysler Pacifica key
How to replace the battery of the Chrysler Pacifica key
Chrysler Pacifica (2017-2024 / MK 1) After several months of use, it may happen that the remote control of your Chrysler Pacifica suddenly stops working due to the completely discharged …

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos