Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the automatic transmission in the Chrysler Pacifica?

Model: Chrysler Pacifica MK 1 - Years 2017-2024
Part: Transmission

In this tutorial, you can see how to reset the automatic transmission in the Chrysler Pacifica, an extremely simple and quick operation to perform as a troubleshooting attempt or after a change of ownership. First, go inside the cabin, then insert the key and turn on the instrument panel, not the engine. Next, press the accelerator pedal and hold it for ten seconds, then turn off the panel. At this point, release the pedal, wait at least two minutes, start the vehicle, and drive a few miles using your desired driving style.

Posted on 21 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Engine Oil Life Light on a Chrysler Pacifica Mk1
How to Reset the Engine Oil Life Light on a Chrysler Pacifica Mk1
Chrysler Pacifica (2017-2024 / MK 1) This guide shows how to reset the oil change light on a Chrysler Pacifica Mk1. To perform this procedure, you must have changed the engine oil. First…
Where is the fuse box of the Chrysler Pacifica located?
Where is the fuse box of the Chrysler Pacifica located?
Chrysler Pacifica (2017-2024 / MK 1) If you want to be able to independently find the box containing all the various fuses of your Chrysler Pacifica, all you have to do is follow this si…
How to replace the battery of the Chrysler Pacifica key
How to replace the battery of the Chrysler Pacifica key
Chrysler Pacifica (2017-2024 / MK 1) After several months of use, it may happen that the remote control of your Chrysler Pacifica suddenly stops working due to the completely discharged …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos