Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Gearbox from a Chrysler Voyager?

Model: Chrysler Voyager MK 4 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Transmission

See other generations:
Video tutorial

To remove the gearbox from a Chrysler Voyager, lift the vehicle using a jack or ramp, so you can remove the front right wheel to access the components within the engine bay. Once the corresponding wheel arch is removed, you can access the gearbox, which must be freed from its housing by unscrewing the corresponding bolts and disconnecting all connectors.

Once the gearbox is free, you can extract it from its position and replace it with a new part.


Updated on 16 May 2026 by ScegliAuto


Related tutorials

Remove the Front Headlamp of a Chrysler Voyager
Remove the Front Headlamp of a Chrysler Voyager
Chrysler Voyager (2000-2007 / MK 4) Want to remove the front headlamp of a Chrysler Voyager? Follow these steps: open the bonnet by pulling the release lever and secure it. Unscrew the …
Replacing the Pollen Filter on a Chrysler Voyager
Replacing the Pollen Filter on a Chrysler Voyager
Chrysler Voyager (2000-2007 / MK 4) On the Chrysler Voyager, the cabin air filter, or pollen filter, is located under the glove compartment. To access it, pull the filter box cover to t…
How to Reset the Oil Light on a Chrysler Voyager
How to Reset the Oil Light on a Chrysler Voyager
Chrysler Voyager (2020-2026 / MK 6) Follow this brief tutorial to reset the engine oil maintenance light on a sixth-generation Chrysler Voyager. First, briefly press the vehicle's start…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos