Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of Centre Tunnel Plastics

Model: Chrysler Pt Cruiser MK 1 - Years 2000-2010
Part: Center console tunnel

This video shows how to remove the centre tunnel of your car. First, using the appropriate screwdrivers, start unscrewing the screws that anchor the centre tunnel. Once the screws are removed, you can take out the tunnel and remove the gear lever cover by simply detaching the various retaining clips. When removing the centre tunnel, pay attention to the various connectors still attached, and for safety and ease of work, disconnect them. To remove the other plastics in your car, simply unscrew the various anchoring screws and pull out the plastics.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing and Replacing the Radiator Fan
Removing and Replacing the Radiator Fan
Chrysler Pt Cruiser (2000-2010 / MK 1) This video shows how to remove and replace the radiator fan. First, remove the rubber strip where the bonnet rests, then disconnect the fan connector…
How to Replace the Timing Belt on a Chrysler PT Cruiser?
How to Replace the Timing Belt on a Chrysler PT Cruiser?
Chrysler Pt Cruiser (2000-2010 / MK 1) To replace the timing belt on a Chrysler PT Cruiser, open the bonnet to remove the plastic cover on the left side of the engine bay. Once this cover …
Replacement of Rear Drums and Shoes
Replacement of Rear Drums and Shoes
Chrysler Pt Cruiser (2000-2010 / MK 1) Lift the rear of the vehicle, apply appropriate axle stands, and remove the wheel corresponding to the drum you will be working on. Apply some penetr…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos