Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to do an engine oil change on Chrysler Voyager

Model: Chrysler Voyager MK 4 - Years 2000-2007
Part: Checks and maintenance

In this video tutorial we can see how to change the engine oil on the Chrysler Voyager. Lift the bonnet and secure it with a special rod, next step, lift the car with a lift or use a hydraulic jack and put on safety stands. Place a container under the car to collect the used oil. Unscrew the bulkhead located under the car and once the bulkhead is removed, unscrew the oil drain plug located in the lower part of the oil pan, wait for all the oil to flow into the container; when all the oil has flowed out, screw the drain plug under the vehicle. Lower the vehicle and top up with new new engine oil.

Posted on 11 June 2022 by ScegliAuto

This video is currently unavailable

Related tutorials

How do you replace the outside rearview mirror on the Chrysler Voyager?
How do you replace the outside rearview mirror on the Chrysler Voyager?
Chrysler Voyager (2000-2007 / MK 4) In order to replace the rearview mirror of the Chrysler Voyager you have to pry a thin object to go and detach the outer cover that wraps the base of…
Where is the fuse box located on the Chrysler Voyager?
Where is the fuse box located on the Chrysler Voyager?
Chrysler Voyager (2020-2026 / MK 6) Let's see thanks to this short video tutorial where the fuse box is located on a sixth generation Chrysler Voyager. The fuse box is located inside th…
How to replace the battery of the Chrysler Voyager remote control
How to replace the battery of the Chrysler Voyager remote control
Chrysler Voyager (2020-2026 / MK 6) The Chrysler Voyager's remote control stopped working due to the battery not functioning, so it is necessary to open the remote control and proceed w…

Other guides you may be interested in

How to Remove the Right Front Door Panel on an Opel Mokka

To remove the right front door panel on an Opel Mokka, follow these steps: disconnect the battery terminals located in the engine bay, then use a screwdriver to remove the screws from the upper door opening lever and the screws in the handle. Next, remove the covering plastic near the lever. Unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel away with your hands and unclip it from the door (disconnect the power wiring and the release cable). Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos