Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chrysler
    3. :
  3. Voyager
    4. : Where is the fuse box located on the Chrysler Voyager?

Chrysler Voyager - Video tutorial

Model: Chrysler Voyager MK 6 - Years 2020-2024
Part: Fuse box
Operation: Where is the fuse box located on the Chrysler Voyager?

Let's see thanks to this short video tutorial where the fuse box is located on a sixth generation Chrysler Voyager. The fuse box is located inside the vehicle's engine compartment, so to reach it we must first pull the hood release lever and then open the hood. Here, the fuse box is located in the upper right area next to the air filter box, so to access the fuses all we have to do is remove the plastic cover. In this tutorial, all the relevant fuse diagrams are also shown.


Posted on 20 July 2023 by ScegliAuto

    Frequently Asked Questions

    • Chrysler Voyager 2008-2016 - Where is the air conditioning fuse located on Chrysler Voyager? Read Answer
    • Chrysler Voyager 2000-2007 - Where is the Chrysler Voyager horn fuse located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos