Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Shock Absorber of the Chrysler 200

Model: Chrysler 200 MK 2 - Years: 2015, 2016, 2017
Part: Shocks

See other generations:
Video tutorial

To replace the rear shock absorber of the Chrysler 200, lift the car so that the rear wheel corresponding to the shock absorber being replaced is not in contact with the ground. Once lifted, unscrew the bolts securing the wheel and remove it to access the rear.

At this point, loosen the bolts securing the shock absorber to the hub and the top of the body, allowing it to be completely removed. After removal, install the new replacement part and secure the wheel.


Updated on 29 May 2026 by ScegliAuto


Related tutorials

How to replace the license plate light of the Chrysler 200
How to replace the license plate light of the Chrysler 200
Chrysler 200 (2015-2017 / MK 2) If you own a second-generation Chrysler 200 and are experiencing issues with the license plate light, don't worry because thanks to the procedure des…
How to Replace the Cabin Air Filter on a Chrysler 200
How to Replace the Cabin Air Filter on a Chrysler 200
Chrysler 200 (2011-2014 / MK 1) If you want to replace the cabin air filter in your 2014 Chrysler 200 yourself, follow the steps in this guide. First, park your Chrysler 200 safely …
How to Replace the Fuel Pump in a Chrysler 200?
How to Replace the Fuel Pump in a Chrysler 200?
Chrysler 200 (2011-2014 / MK 1) In this tutorial, you will see how to replace the fuel pump in a Chrysler 200, a very simple and quick operation. Before proceeding, open the hood an…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos