Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Boot Struts

Model: Chrysler Voyager MK 4 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Door trim panel

See other generations:
Video tutorial

This is a simple and quick operation that saves you time and money by avoiding a trip to the garage. Just follow this brief guide to complete the replacement yourself.

Open the boot and assess the fault with your vehicle. If the struts do not support the boot, hold it up with a suitable prop.

To remove the struts, simply unscrew the bolts at both ends. If necessary, repeat the process for the other strut.

Then, install the new struts by retracing the steps in reverse.


Updated on 24 February 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Lights on a Chrysler Voyager?
How to Replace the Rear Lights on a Chrysler Voyager?
Chrysler Voyager (2000-2007 / MK 4) To replace the rear lights on a Chrysler Voyager, use a lever tool to remove the securing clips accessible by opening the boot lid. There are two cli…
How to Fold the "Stow'n Go" Rear Seat on Chrysler Voyager
How to Fold the "Stow'n Go" Rear Seat on Chrysler Voyager
Chrysler Voyager (2020-2026 / MK 6) In this video, we can see how to fold the "Stow'n Go" rear seat of the Chrysler Voyager: it is a truly ingenious system for folding the rear seats in…
Locating the Fuse Box on the Chrysler Voyager MK3
Locating the Fuse Box on the Chrysler Voyager MK3
Chrysler Voyager (1995-2000 / MK 3) In this video, we will see the location and list of fuses found on the Chrysler Voyager version 1996/2001. The first fuse box is located in the cabin…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos