Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlamp Bulb on a Citroen C3

Model: Citroen C3 SY, SX - Years 2016-2023
Part: Tail light bulb

For this simple and quick operation, you will need to open the boot. For safety, it is advisable to disconnect the battery cables to protect any sensitive circuits. Once in the boot, open the access flap on the side to reach the plastic clips that need to be unscrewed to release the headlamp and remove it from the outside. This way, you can disconnect the connectors at the back of the headlamp to carry out the necessary work. Reverse the steps described for reassembling the various components.

Updated on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulb on a Citroën C3?
How to Replace the Rear Light Bulb on a Citroën C3?
Citroen C3 (2016-2023 / SY, SX) To replace the rear light bulb on a Citroën C3, open the tailgate to access the side of the boot corresponding to the bulb to be replaced. Under the …
How to Change the Rear Light Bulb on a Citroen C3
How to Change the Rear Light Bulb on a Citroen C3
Citroen C3 (2009-2016 / SC) Do you want to replace the bulb of the rear light? Let’s see how to remove the rear light of the Citroen C3. Lift the boot lid, then remove the fabri…
How to Replace the Rear Light Bulb on a Citroën C3
How to Replace the Rear Light Bulb on a Citroën C3
Citroen C3 (2009-2016 / SC) To replace the rear light bulb on a Citroën C3, open the tailgate so you can move the carpet inside the boot corresponding to the light. Once moved, …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos