Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulb of a Citroen C1?

Model: Citroen C1 MK 1 - Years 2005-2014
Part: Light bulb

Welcome back to Choosecar. Com! Today's goal is to replace the faulty car radio of our Citroen C1. Let's start by opening the front hood. Then, using a flathead screwdriver, we will have to unhook the rubber cover of the bulb, thus reaching the bulb itself. At this point, all we have to do is disconnect the bulb wires and remove it. To install the new bulb, we will have to follow this guide backwards using the new bulb, and our Citroen C1 will be able to drive again! Thank you for following our guide, we hope to see you again!

Posted on 9 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Citroen C1
How to replace the front headlight bulb of the Citroen C1
Citroen C1 (2005-2014 / MK 1) The following video tutorial shows us how to replace the headlight bulb of the right front headlight of a Citroen C1 car, model produced from 2005 to…
How do you replace the front headlight bulb of the Citroën C1?
How do you replace the front headlight bulb of the Citroën C1?
Citroen C1 (2005-2014 / MK 1) The replacement of the front headlight bulb on the Citroën C1 is done by opening the hood, so that access can be gained to the components located ins…
How to replace the front headlight bulb of the Citroen C1
How to replace the front headlight bulb of the Citroen C1
Citroen C1 (2005-2014 / MK 1) Replacing the front headlight bulb of the Citroen C1 independently is a very simple operation. To replace the bulb, we need to: -open the hood; -disc…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos