Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Battery on the Citroen C1 MK1

Model: Citroen C3 FC, FN - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Battery

See other generations:
Video tutorial

In this video, you will see that if the battery of the Citroen C3 MK1 is flat and does not hold subsequent attempts to recharge it, you need to replace it. Open the bonnet of the engine compartment; the battery is located on the driver's side. Start by removing the two-piece protective cover, then disconnect the control unit on the left and set it aside.

Loosen and remove the negative terminal, disconnect the positive terminal, press the release lever on the right, and remove the battery using its handle. Clean the compartment and insert the new battery, securing it with the lever.

Apply a thin layer of copper grease on the terminals, and clean the inside of the terminals with sandpaper. Reattach the terminals to the battery, starting with the positive, replace the control unit, and the two-piece cover.


Updated on 31 October 2026 by ScegliAuto


Related tutorials

Citroen C3 (2009-2016 / SC) In this brief and simple guide, see how to remove and replace the battery in the Citroen C3 with a 1.4 HDI engine. First, open the bonnet and start b…
Citroen C3 (2009-2016 / SC) The Citroen C3 battery is located inside the front hood next to the engine. The battery is protected by a hard plastic cover that must be removed bef…
Citroen C3 (2016-2023 / SY, SX) This guide will show you how to remove and replace the battery in a Citroen C3. First, open the bonnet by pulling the lever from inside the vehicle, …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos