Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset the Oil Change Light on a Citroen C6

Model: Citroen C6 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Service warning light

Video tutorial

In this tutorial, learn how to reset the oil change light on a Citroen C6. The operation is very simple and can be done independently after performing the regular service on the vehicle. Start by pressing and holding the button on the left side of the speedometer, then turn on the instrument panel without starting the engine.

Once done, you will notice a ten-second countdown on the information display, so continue to hold the button until the countdown ends to perform the reset. Finally, restart the vehicle.


Updated on 6 November 2026 by ScegliAuto


Related tutorials

Where is the OBD port of the Citroen C6 located?
Where is the OBD port of the Citroen C6 located?
Citroen C6 (2005-2012 / MK 1) In the following mini guide you will find all the steps you need to follow to easily locate the OBD port inside your Citroen C6. First of all, enter …
Where is the fuse box for the Citroen C6 engine located?
Where is the fuse box for the Citroen C6 engine located?
Citroen C6 (2005-2012 / MK 1) If you want to identify by yourself the box containing all the various fuses of the engine of your Citroen C6, then all you have to do is pay attenti…
How do you replace the headlight bulb of the Citroën C6?
How do you replace the headlight bulb of the Citroën C6?
Citroen C6 (2005-2012 / MK 1) In order to replace the headlight bulb of the Citroën C6, you need to open the hood so that you can access the engine compartment: here you will find…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos