Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the sliding door of the Citroen Berlingo

Model: Citroen Berlingo MK 3 - Years 2018-2026
Part: Car door

In this video we see how to remove the sliding door of a Citroen Berlingo: we open the door and see that inside we have a cable where electrical cables pass. We remove the plastic covering of the step to climb onto the working platform of the vehicle, in order to reach the joint, where the wires are stored. We have to unscrew it to expose them, and then we remove the connector that is located right in the corner where we removed the cover. Once we have removed the wiring, we remove the rubber stopper located on the inside of the door. Then we remove the stopper where the door slides, and finally we remove the two screws holding the sliding arm. And there you have it.

Posted on 1 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the handle of the sliding tailgate of the Citroën Berlingo?
How do you replace the handle of the sliding tailgate of the Citroën Berlingo?
Citroen Berlingo (2008-2018 / MK 2) To replace the handle of the sliding tailgate of the Citroën Berlingo, you will need to loosen the screws and remove the fixing rivets of the inner l…
How do you remove the sliding door of the Citroën Berlingo?
How do you remove the sliding door of the Citroën Berlingo?
Citroen Berlingo (2008-2018 / MK 2) In order to remove the sliding tailgate of the Citroën Berlingo, you need to fully open it so that you can access the hinges located at the bottom: b…
How to replace the handle of the sliding door of the Citroen Berlingo
How to replace the handle of the sliding door of the Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) Today's instructions will show us how to disassemble and replace the external door handle of the Citroen Berlingo. First, we get into the car and sta…

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos