Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting maintenance on a Citroen C3 Picasso

Model: Citroen C3 Picasso MK 1 - Years 2008-2017
Part: Checks and maintenance

In today's video you will see how to reset the maintenance of a Citroen C3 Picasso, this operation is very simple to do and you can do it independently after performing the regular oil change on your vehicle. Let's start the procedure by pressing and holding the "000" button on the right side of the speedometer and then turning on the vehicle's instrument panel without starting the engine. After doing this, we will see the maintenance key icon appear on the speedometer's information display along with a ten-second countdown, so we continue to hold down the "000" button until the time expires to reset the maintenance.

Posted on 12 December 2024 by ScegliAuto

Video tutorial

Related tutorials

When to Change the Filter on the Citroen C3 Picasso 1.4
Citroen C3 Picasso (2008-2017 / MK 1) How to change the air filter on the Citroen C3 Picasso? Open the front bonnet and remove the covering pieces. Locate the air filter once the engine b…
How to reset the service in the Citroen C3 Picasso?
How to reset the service in the Citroen C3 Picasso?
Citroen C3 Picasso (2008-2017 / MK 1) Resetting the service in the Citroen C3 Picasso, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, it wi…
Where is the OBD port located in the Citroen C3 Picasso?
Where is the OBD port located in the Citroen C3 Picasso?
Citroen C3 Picasso (2008-2017 / MK 1) If you don't know where the OBD port of your Citroen C3 Picasso is located, then all you have to do is read the following guide and follow the few si…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos