Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the Citroen C3 windshield washer pump

Model: Citroen C3 FC, FN - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Pump

See other generations:
Video tutorial

Below we will see the instructions that will allow us to disassemble and replace the windshield washer pump of the Citroen C3. First of all, we lift the hood of the car and start disassembling and removing the front bumper, in order to access the windshield washer fluid reservoir and pump; to do this, it will be necessary to unscrew all the fixing screws, then also remove the clips, as shown in the video.

At this point, disconnect the pump hose and electrical connector, removing it from the fluid tank; replace it with the new one and finally reassemble the bumper!


Posted on 27 December 2024 by ScegliAuto


Related tutorials

Replacement of the Windscreen Washer Pump on the Citroen C3
Replacement of the Windscreen Washer Pump on the Citroen C3
Citroen C3 (2009-2016 / SC) In this brief and simple guide, you will learn how to remove and replace the windscreen washer pump on the Citroen C3, following the instructions bel…
Removing the Windscreen Washer Pump on Citroen C3 MK1
Removing the Windscreen Washer Pump on Citroen C3 MK1
Citroen C3 (2002-2009 / FC, FN) Watch this video to see how to remove the windscreen washer pump on a first-generation Citroen C3 in simple steps. First, lift the vehicle on the fro…
How to replace the windscreen washer pump in the Citroën C3?
How to replace the windscreen washer pump in the Citroën C3?
Citroen C3 (2002-2009 / FC, FN) To replace the windscreen washer pump in the Citroën C3, loosen all the screws securing the right front headlight assembly and the front bumper, so b…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos