Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Windscreen Washer Pump on Citroen C3 MK1

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Pump

Watch this video to see how to remove the windscreen washer pump on a first-generation Citroen C3 in simple steps. First, lift the vehicle on the front right side and remove the front wheel by unscrewing the bolts; then remove the wheel arch liner by taking out all the retaining clips. At this point, access the washer fluid reservoir and the pump; detach the pump from the reservoir and disconnect the washer fluid hoses, letting it drain into a container. Finally, disconnect the electrical connector to remove and replace it, as shown in the video!

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Wiper Blade on a Citroen C3
How to Remove the Rear Wiper Blade on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) This guide shows you how to remove and replace the rear wiper blade on a Citroen C3. Grasp the rear wiper blade with your hands, gently pull the rubb…
How to Replace the Rear Wiper Blade on a Citroen C3
How to Replace the Rear Wiper Blade on a Citroen C3
Citroen C3 (2016-2023 / SY, SX) In this brief guide, we will see the instructions that will allow us to remove and replace the rear wiper blade of the Citroen C3 in simple steps. Fi…
Guide to replacing the oil pump of the Citroen C3 1.2 VTI
Guide to replacing the oil pump of the Citroen C3 1.2 VTI
Citroen C3 (2009-2016 / SC) Today's guide will show you the main steps to remove and replace the faulty oil pump of the Citroen C3 1.2 VTI. The oil pump replacement operation is…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos