Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Windscreen Washer Pump on the Citroen C3

Model: Citroen C3 SC - Years 2009-2016
Part: Pump

In this brief and simple guide, you will learn how to remove and replace the windscreen washer pump on the Citroen C3, following the instructions below. First, raise the vehicle on the right side and start by removing the wheel; then, unscrew the fastening screws of the plastic cover of the wheel arch, thus accessing the washer fluid pump, as shown in the video. At this point, disconnect the fluid hoses and remove the washer pump, replacing it with the new one (as well as the original); reassemble everything and pour the new washer fluid into the reservoir!

Updated on 14 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the Citroen C3 windshield washer pump
Guide to replacing the Citroen C3 windshield washer pump
Citroen C3 (2002-2009 / FC, FN) Below we will see the instructions that will allow us to disassemble and replace the windshield washer pump of the Citroen C3. First of all, we lift …
How do you replace the windshield washer pump of the Citroën C3?
How do you replace the windshield washer pump of the Citroën C3?
Citroen C3 (2002-2009 / FC, FN) In order to replace the windshield washer pump of the Citroën C3, you need to loosen all the screws that secure the right front headlight assembly an…
Removing the Windscreen Washer Pump on Citroen C3 MK1
Removing the Windscreen Washer Pump on Citroen C3 MK1
Citroen C3 (2002-2009 / FC, FN) Watch this video to see how to remove the windscreen washer pump on a first-generation Citroen C3 in simple steps. First, lift the vehicle on the fro…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos