Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the speakers of the Citroen Berlingo

Model: Citroen Berlingo MK 3 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Speaker

See other generations:
Video tutorial

In this video we can see how to replace the speakers of the Citroen Berlingo, which in their standard equipment are not of excellent quality. First of all, we need to remove the internal lining panel, unscrewing the three Torx screws (2 on the outside and one under the mirror), then remove the handle from the inside (here too we will find two Torx screws holding the handle, under a small plastic partition); pull off the plastic lining, which at this point is only held by clips, and replace the old speaker with a new one of our liking, tearing off the white interlayer and the damping mat inside the door.

Now we can reassemble everything, following the reverse path.


Posted on 30 December 2024 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a Citroën Berlingo
How to Replace the Air Filter on a Citroën Berlingo
Citroen Berlingo (2008-2018 / MK 2) To replace the air filter on a Citroën Berlingo, open the bonnet to remove the plastic cover from the top of the engine block. Once this is removed, …
How to Change the Headlight Bulbs on the Citroen Berlingo 2
How to Change the Headlight Bulbs on the Citroen Berlingo 2
Citroen Berlingo (2008-2018 / MK 2) In this short video, learn how to remove and replace the headlight bulbs on the Citroen Berlingo second series, following the instructions below. Fir…
How to replace the turbocharger of the Citroen Berlingo 1.6 HDi
How to replace the turbocharger of the Citroen Berlingo 1.6 HDi
Citroen Berlingo (2008-2018 / MK 2) Below we will see the main instructions that will allow us to disassemble and replace the turbocharger of the Citroen Berlingo 1.6 HDi. First, we ope…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos