Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the cabin fan of the Citroen C4

Model: Citroen C4 MK 2 - Years 2010-2018
Part: Blower motor

Today we will discover the instructions that will allow us to disassemble and replace the cabin fan of the Citroen C4. First of all, we get into the car and start by disassembling and removing the glove compartment, unscrewing the fixing screws; inside we find the cabin fan, where we will disconnect the various wiring and unscrew the fixing screws to remove it, as shown in the video. At this point, we also disassemble the fan resistor, replacing the component with a new one if necessary; we reassemble the new cabin fan and check its operation.

Posted on 2 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Guide to Removing the Cabin Fan of the Citroen C4
Guide to Removing the Cabin Fan of the Citroen C4
Citroen C4 (2004-2010 / MK 1) The main steps in this guide will show you how to remove and replace the cabin fan of the Citroen C4. First, open the front door and start by removin…
How to Replace the Cabin Fan in a Citroën C4?
How to Replace the Cabin Fan in a Citroën C4?
Citroen C4 (2004-2010 / MK 1) You can replace the cabin fan in a Citroën C4 by loosening the screws that secure the trim panel on the left side of the footwell on the passenger si…
How do you replace the cabin fan of the Citroën C4?
How do you replace the cabin fan of the Citroën C4?
Citroen C4 (2010-2018 / MK 2) To replace the cabin fan of the Citroën C4, you need to open the glove compartment located on the passenger side: once this is open, you will need to…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos