Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the cabin fan of the Citroen C4 Cactus.

Model: Citroen C4 Cactus - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Blower motor

See other generations:
Video tutorial

Let's see how it is possible to replace the cabin fan of the Citroen C4 Cactus without removing the entire dashboard. First, we disconnect the negative terminal of the battery for safety, then we adjust the steering wheel to maximize space and remove the lower cover of the steering wheel, then unlock it: underneath, there is a 13 mm bolt that secures the steering wheel to the shaft, which we will remove.

It is advisable to remove the steering wheel, marking its position relative to the shaft for reassembly (but this is not necessary, although it provides much more space and visibility). Now we locate the air conditioning box, situated in the center behind the console, and the fan is located on one side of this compartment.

We disconnect the electrical connector, unlock the bayonet lock ring, and extract the fan. We clean the housing and install the new one (which we found on auto-doc.it with the EAN code 8717613463130 for the price of 40.99 euros, with free delivery), securing it and reconnecting the electrical connector.

If we have removed the steering wheel, we put it back in place; otherwise, we reattach the fastening bolt to the shaft and the lower cover of the steering wheel.

We reconnect the battery, and we're done.


Posted on 6 December 2025 by ScegliAuto


Related tutorials

Citroen C4 (2014-2020 / Cactus) The replacement of the cabin air filter in your Citroen C4 Cactus only takes a few minutes to complete correctly and thanks to the following procedur…
Citroen C4 (2014-2020 / Cactus) In this guide for Citroen C4 Cactus owners, you will learn how to replace the cabin air filter independently and safely. First, open the front bonnet…
Citroen C4 (2014-2020 / Cactus) To manually reset the service light on the instrument cluster of your Citroen C4 Cactus (2016 model), follow the procedure described in this guide. B…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos