Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the EGR valve in the Citroen C3?

Model: Citroen C3 SC - Years 2009-2016
Part: EGR valve

In this tutorial, we can see how to replace the EGR valve in the Citroen C3, a very simple and quick operation. First of all, make sure that the engine is cold enough, then open the hood and remove the plastic cover. Next, disconnect the intake duct, remove the entire air filter box, and then the fuel filter. At this point, we can disconnect the various tubes of the valve, unscrew the fixing bolts with an 8mm wrench, and remove it from the housing. To install the replacement, simply follow the reverse procedure.

Posted on 6 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Disassembly and replacement of the EGR valve of the Citroen C3 1.4 HDi
Disassembly and replacement of the EGR valve of the Citroen C3 1.4 HDi
Citroen C3 (2002-2009 / FC, FN) In this guide, we will see step-by-step instructions on how to disassemble and replace the EGR valve of the Citroen C3 1.4 HDi. First, let's open the…
Disassembly of the EGR valve of the Citroen C3 1.4 HDI.
Disassembly of the EGR valve of the Citroen C3 1.4 HDI.
Citroen C3 (2009-2016 / SC) The step-by-step instructions in this guide will show us how to disassemble and replace the EGR valve of the Citroen C3 1.4 HDI. First, we open the h…
How to replace the EGR valve on a Citroen C3 1.4 HDI
How to replace the EGR valve on a Citroen C3 1.4 HDI
Citroen C3 (2009-2016 / SC) In this video, we will see how to change the EGR valve on a Citroen C3 1.4 HDI: open the bonnet and disconnect the mass air flow sensor and the elect…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos