Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulb of the Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Headlight bulb

Replacing the front headlight bulb of your Citroen C3 first series on your own is really very simple. All you have to do is carefully read the steps described in the following guide and then put them into practice. First, lift the front hood of the car and properly position the safety hook. Once you have done that, disconnect the electrical cable located at the back of the headlight that needs to be replaced and then remove the bulb holder. Finally, replace the non-functioning bulb with a new one and reassemble everything.

Posted on 6 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb of the Citroen C3
How to replace the headlight bulb of the Citroen C3
Citroen C3 (2009-2016 / SC) To replace the headlight bulb on a Citroen C3 vehicle, we need to open the front hood and remove the plastic cover on the headlight by simply lifting…
How to replace the headlight bulb of the Citroen C3
How to replace the headlight bulb of the Citroen C3
Citroen C3 (2002-2009 / FC, FN) These simple steps will allow us to disassemble and replace the headlight bulb of the Citroen C3. First, open the hood and remove the plastic bulb pr…
How to Change the Headlight Bulb on a Citroen C3
How to Change the Headlight Bulb on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) Replacing the front headlight bulb on the Citroen C3 (H7 fitting) is quite straightforward as there is enough room to manoeuvre behind the headlight …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos