Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Centre Tunnel on Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Center console tunnel

How to remove the centre tunnel on a Citroen C3. Using a plastic lever, pry off the covering located at the bottom of the centre tunnel, then remove the leather gaiter and the gear knob. After removing the knob and gaiter, unscrew the securing screw located at the rear of the centre tunnel with a screwdriver. Once this is done, pull the tunnel away and disconnect any power cables. Finally, insert the new part into the centre tunnel, reassemble all the components of the glove compartment as they were removed earlier.

Updated on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Citroen C3 (2002-2009 / FC, FN) Do you want to replace the gear knob on your Citroen C3? Follow these steps. Remove the plastic trim (leather gaiter with the surrounding frame) from…
Citroen C3 (2002-2009 / FC, FN) To replace the gear selector cables on a Citroën C3, lift the gear gaiter and remove the corresponding knob. This will allow you to detach the clips …
Citroen C3 (2002-2009 / FC, FN) Usually the decision to disassemble said fan is reached because the fuse and power cables are intact, so the problem could involve the resistance of …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos