Do it yourself
Frequently asked questions about cars and motorcycles

How do you open the hood of the Citroën C3?

Model: Citroen C3 FC, FN - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Checks and maintenance

See other generations:
Video tutorial

In order to open the hood of the Citroën C3, you need to pull the lever located inside the passenger compartment, on the dashboard immediately below the steering column: by pulling this lever, you will notice that the hood will be unlocked and ready to be lifted.

To do this, you will need to insert your hand into the lower part of the hood, thus moving the latch that secures the lock to its seat.

The hood can then be lifted completely and secured with its rod; to close it, you will need to push it down with sufficient force.


Posted on 22 April 2025 by ScegliAuto


Related tutorials

Citroen C3 (2002-2009 / FC, FN) Note that the vehicle shown in the video is a Citroen C3 produced between 2009 and 2016, but the method for opening the front bonnet is the same as f…
Citroen C3 (2016-2023 / SY, SX) To unlock and open the front bonnet of the Citroen C3, follow these steps: open the driver's door and access the driver's seat; at the bottom left un…
Citroen C3 (2002-2009 / FC, FN) In order to open the hood of the Citroën C3, you need to pull the red lever located inside the cabin, immediately to the bottom left of the steering …

    Frequently Asked Questions

    • C3 2002-2009 - Where is the horn located in the Citroen C3? Read answer
    • C3 2009-2016 - What to do in case of malfunction of the external temperature sensor in the Citroen C3? Read answer
    • C3 2009-2016 - How many reversing lights does the Citroen C3 have? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos