Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : How to remove the clutch on a Citroen C3

Citroen C3 - Video tutorial

Model: Citroen C3 FN, FC - Years 2002-2009
Part: Clutch
Operation: How to remove the clutch on a Citroen C3

Let's see how to remove the clutch on a Citroen C3. We disconnect the battery terminals to safeguard the car's electrical system. First of all, we lift the car on a column point up to the desired height, immediately after we go to remove the plastic panel that covers the engine (if present in the lower part) with the respective pins. We remove the front wheels to work better; unscrew the pins of the spindle with a socket and remove them. We locate the gear lever, underneath there are two pins that hold the clutch under tension. We remove all the clutch components. Let's get ready to assemble the new clutch disc with related parts. Let's proceed with the assembly.


Posted on 30 October 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • C3 2009-2016 - How much does the clutch of the Citroen C3 cost? Read Answer
    • C3 2016-2023 - How much does it cost to replace the clutch actuator on the Citroën C3? Read Answer
    • C3 2009-2016 - How much does it cost to replace the Citroen C 3 clutch? Read Answer
    • C3 2009-2016 - What problems gives the clutch on the Citroen C3? Read Answer
    • C3 2009-2016 - How much does it cost to replace the clutch on the Citroen n C3 1.4 HDi? Read Answer
    • C3 2016-2023 - How much does it cost to replace the clutch of the Citroà «n C3 1.4 Hdi? Read Answer
    • C3 2002-2009 - How much does it cost to replace the clutch of a Citroen C3? Read Answer
    • C3 2009-2016 - How much is the clutch on Citroen C3? Read Answer
    • C3 2002-2009 - How much does it cost to replace the clutch on the Citroen C3? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos