Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the bumper of the Citroen Berlingo 1?

Model: Citroen Berlingo MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Front bumper

See other generations:
Video tutorial

The bumper of the Citroen Berlingo 1 is removed exactly as the attached video guide shows, specifying that this methodology is also valid for the Peugeot Partner. Let's get a suitable sized Torx ratchet key and proceed: Start by unscrewing the locking screws of the front grille, so that it can be removed and later access the bumper pins.

The bumper has its own pins to unscrew on both the upper and lower parts, as well as at the back, near the wheel arches. The work is almost done, all that's left is to pull it forward and disconnect the rear connector of the electrical cables.


Posted on 17 August 2025 by ScegliAuto


Related tutorials

How to Remove a Bumper on Citroen Berlingo
How to Remove a Bumper on Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Removing the front bumper of the Citroen Berlingo? Remove the front wheels for easier access. Unscrew the securing screws located inside the wheel ar…
How to Remove the Front Bumper from a Peugeot Berlingo
How to Remove the Front Bumper from a Peugeot Berlingo
Citroen Berlingo (2008-2018 / MK 2) Removing the front bumper from a Peugeot Berlingo. Here’s how to detach it from the front of the Peugeot. Lift the front bonnet, remove the rivets/sc…
Removing Front Bumper on Citroen Berlingo
Removing Front Bumper on Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) In today's video tutorial, you will learn how to remove the front bumper from a Citroen Berlingo. First, open the bonnet from inside the car and remo…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos