Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper from a Peugeot Berlingo

Model: Citroen Berlingo MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Rear bumper

See other generations:
Video tutorial

Removing the front bumper from a Peugeot Berlingo. Here’s how to detach it from the front of the Peugeot.

Lift the front bonnet, remove the rivets/screws located at the top of the bumper. Once the rivets at the top are removed, unscrew the rivets from the wheel arch liners and finally remove the pins located at the bottom of the bumper.

Remove the bumper from the front of the Berlingo (disconnect the electrical connectors if present). Position the new bumper by hand, tighten all screws around the wheel arch liners and around its perimeter.

Don’t forget to reconnect the electrical connectors if they were disconnected earlier.


Updated on 27 March 2026 by ScegliAuto


Related tutorials

How to Remove a Bumper on Citroen Berlingo
How to Remove a Bumper on Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Removing the front bumper of the Citroen Berlingo? Remove the front wheels for easier access. Unscrew the securing screws located inside the wheel ar…
How do you remove the bumper of the Citroen Berlingo 1?
How do you remove the bumper of the Citroen Berlingo 1?
Citroen Berlingo (1996-2013 / MK 1) The bumper of the Citroen Berlingo 1 is removed exactly as the attached video guide shows, specifying that this methodology is also valid for the Peu…
Removing Front Bumper on Citroen Berlingo
Removing Front Bumper on Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) In today's video tutorial, you will learn how to remove the front bumper from a Citroen Berlingo. First, open the bonnet from inside the car and remo…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos