Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Berlingo
    4. : Citroen Berlingo front bumper removal

Citroen Berlingo - Video tutorial

Model: Citroen Berlingo MK 1 - Years 1996-2013
Part: Front bumper
Operation: Citroen Berlingo front bumper removal

In today's video tutorial we will see how to remove the front bumper of a Citroen Berlingo. First we go to open the bonnet from inside the car and first remove the upper plastic bulkhead by removing the screws: then we go to unscrew the screws that we find in the wheel arches and the bolts inside them, which support ours bumper. At this point we begin to unhook the bumper from the two side parts and then we go to unscrew the screws that we find under the bumper; now we gently pull out the bumper, so as not to damage it.


Posted on 24 December 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos