Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the tie rod and steering rack in a Citroën C3 II?

Model: Citroen C3 SC - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tie rods

See other generations:
Video tutorial

To replace the tie rod and steering knuckle in a Citroën C3, lift the car safely and remove the wheel. Loosen the lock nut that secures the knuckle on the tie rod, then unscrew the nut on the knuckle connected to the hub. Use a puller or a firm tap to free the knuckle.

Now unscrew the knuckle from the tie rod, counting the turns (so you don't misalign the convergence). If you also need to change the inner tie rod, remove the steering boot, then use a specific key to unscrew it from the rack.

Install the new tie rod and tighten it well, then put back the boot. Screw in the new knuckle using the same number of turns as before, secure everything, put the wheel back on, and go get the convergence adjusted.

Done calmly, it can also be done in a garage. If you don't feel comfortable doing it yourself, contact an experienced mechanic.


Posted on 9 October 2025 by ScegliAuto


Related tutorials

How to Replace the Door Stay on the Citroen C3
How to Replace the Door Stay on the Citroen C3
Citroen C3 (2002-2009 / FC, FN) The failure of the door stay, which keeps the door open, is a common issue on this model; to replace the stay, first remove the door panel: unscrew t…
How to replace the steering rods on the Citroën C3?
How to replace the steering rods on the Citroën C3?
Citroen C3 (2002-2009 / FC, FN) To replace the steering rods on the Citroën C3, lift the car using a ramp or a jack and remove the wheel corresponding to the rod to be replaced. Thi…
How to replace the stabilizer bar link of the Citroën C3
How to replace the stabilizer bar link of the Citroën C3
Citroen C3 (2009-2016 / SC) To replace the stabilizer link of the Citroen C3, we need to lift the front part of the car and remove the right front wheel. The stabilizer link con…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos