Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Citroen
  4. :
  5. C5
  6. : How to remove the stabilizer bar on the front of a Citroen C5

Citroen C5 - Video tutorial

Model: Citroen C5 DC, MK 1 - Years 2000-2008
Part: Anti roll bar
Operation: How to remove the stabilizer bar on the front of a Citroen C5

Let's see how to remove the stabilizer bar on the front of a Citroen C5. Let's see how to proceed: we position our car on a column bridge, we lift to a comfortable height to intervene; unscrew the wheel pins (with a telescopic wrench or compressed air drill) and remove the rim, then we begin to unscrew the pins of the swinging arm with a socket wrench. We unscrew the pins under the plate that holds the stabilizer bar and remove it from its seat. We mount the new stabilizer bar (same size and type), then, we begin to mount the same one with all the pins attached. Finally we assemble the circle with the pins.


Posted on 5 November 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos