Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to disassembling the front seat of the Citroen C4

Model: Citroen C4 MK 2 - Years 2010-2018
Part: Seat

In this guide, we will see the instructions that will allow us to disassemble the front seat of the Citroen C4. First, let's open the front door of the vehicle and start unscrewing all the fastening screws we find on the front seat tracks, moving the seat back and forth to access them; then, we disconnect the electrical connector located underneath, as shown in the video. At this point, we remove the seat from the cabin, either repairing it or replacing it with a new one; we then reassemble the seat and finally adjust the driver's seat.

Posted on 14 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove a headlight on Citroen C4
How to remove a headlight on Citroen C4
Citroen C4 (2004-2010 / MK 1) Let's see how to remove a headlight on Citroen C4: open the engine hood by pulling the hood opening lever and put it in safety. We unscrew the lockin…
Guide to disassembling the cabin fan of the Citroen C4.
Guide to disassembling the cabin fan of the Citroen C4.
Citroen C4 (2004-2010 / MK 1) The main steps outlined in this guide will show us how to disassemble and replace the cabin fan of the Citroen C4. First, we open the front door and …
How to temporarily repair the front seat of a Citroen C4
How to temporarily repair the front seat of a Citroen C4
Citroen C4 (2004-2010 / MK 1) This video teaches us how to temporarily repair the front seat of a Citroen C4, where the head of the seat lowering mechanism is broken. The youtuber…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos