Do it yourself
Frequently asked questions about cars and motorcycles

How to change the cabin air filter of the Citroen C3

Model: Citroen C3 Pluriel - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Cabin air filter

See other generations:
Video tutorial

On the Citroen C3, the cabin air filter is accessed from the engine compartment, in the area at the base of the windshield, behind the plastic under the windshield. In the video, the hood is opened, and the correct area is immediately identified: work is done near the edge of the windshield, where there is space to reach the filter holder.

Once the access point is found on the Citroen C3, the small door/filter cover is released, and the hand is inserted to grasp the filter. The old filter is removed by sliding it out of its seat, with a controlled motion to avoid tearing it and to prevent leaving dirt around the area.

Immediately after, the new filter is taken and inserted into the same spot, making sure it goes in straight and all the way in, thus correctly resting inside the filter holder.


Posted on 18 January 2026 by ScegliAuto


Related tutorials

Citroen C3 (2016-2023 / SY, SX) When the cabin air filter in your Citroen C3 (2023 model) is worn out, you need to replace it as soon as possible. Fortunately, this is a straightfor…
Citroen C3 (2002-2009 / FC, FN) In this video, you will learn how to dismantle and replace the cabin air filter on the Citroen C3, following these simple and quick steps. First, ope…
Citroen C3 (2016-2023 / SY, SX) By following the steps described in this guide, you will be able to independently replace the cabin air filter of your Citroen C3. First, purchase a …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos