Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Citroen DS3

Model: Citroen Ds3 MK 1 - Years 2010-2019
Part: Service warning light

This video shows how to reset the service light on a Citroen DS3. Get into the vehicle, insert the key into the ignition slot (or press the start button without starting the engine). Press and hold the trip reset button on the dashboard, usually located near the rev counter; keep holding it and turn on the ignition by turning the key or pressing start again. At this point, a countdown will appear on the display; release the button when the display shows "=0" or "service reset". Turn off and then back on the ignition to check that the light has disappeared.

Posted on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Citroen Ds3 (2010-2019 / MK 1) .. In this short video, learn how to reset the service light on a Citroen DS3. It is a very simple operation that can be completed.. …
Citroen Ds3 (2010-2019 / MK 1) In today's article, you will learn how to reset the service light on the Citroen DS3. It is recommended to perform this operation only after having t…
Citroen Ds3 (2010-2019 / MK 1) If you have just completed a service on your Citroen DS3 and notice the corresponding warning light illuminated on the display, do not worry as this …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos