How to Reset the Service on a Citroen C2

Model: Citroen C2 MK 1 - Years 2003-2010
Part: Warning light – error code

How to reset the service on a Citroen C2. This is a very simple operation: Enter the vehicle, turn on the ignition with the appropriate key (you will see the maintenance message), turn off the ignition and press the button next to the instrument cluster. Turn the ignition back on and wait for the seconds to count down (release the button when the seconds run out). Turn off the ignition with the appropriate key, then turn it back on to check the maintenance status (the light should no longer stay on). Always remember to make changes to the onboard computer with the vehicle stationary and turned off.

Updated on 8 March 2026 by ScegliAuto

This video is currently unavailable

Other guides you may be interested in

Onboard Computer - Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

Instrument Cluster - Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!

by ScegliAuto

How to Reset the Service on a Citroen C2

Related tutorials

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

More videos