Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Rear Shock Absorbers on the Citroen C1

Model: Citroen C1 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Shocks

See other generations:
Video tutorial

On the Citroen C1, start at the rear: the video shows loosening the wheel bolts and then lifting the car and securing it on axle stands, so the rear suspension area is free. With the wheel removed, the shock absorber is visible near the spring, allowing access to its fixings.

Begin removal from the lower fixing: work on the lower bolt of the shock absorber, unscrew it, and free the eye from its seat. To remove and refit the part without forcing, the video also shows a jack positioned under the rear axle, useful for maintaining the correct height while aligning the holes.

Next, move to the upper part: the head of the shock absorber with the rubber and nut is shown, and proceed to unscrew and remove the old shock absorber. Immediately after, the new shock absorber is shown outside the box, ready for installation.

Reassembly on the Citroen C1 follows the same order in reverse: position the new shock absorber, insert the upper part, and then realign the lower fixing using the jack until everything fits. Once the bolts are in place, tighten the fixings and refit the wheel, lowering the car to the ground at the end of the job.


Posted on 8 August 2026 by ScegliAuto


Related tutorials

Citroen C1 (2005-2014 / MK 1) Remove the headliner and fold down the rear seats. Remove the side covers inside the trunk as shown in the video: it is recommended to use a plastic …
Citroen C1 (2005-2014 / MK 1) Follow this guide for instructions on how to lower or recline the backrests of the rear seats in the Citroen C1 in simple and quick steps. First, ope…
Citroen C1 (2005-2014 / MK 1) Today, we will look at the instructions that will allow you to install or replace the rear speakers on the Toyota Aygo. First, get inside the vehicle…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos