Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windscreen Washer Fluid on a Citroen C3 Picasso

Model: Citroen C3 Picasso MK 1 - Years 2008-2017
Part: Checks and maintenance

Is the windscreen washer fluid empty? Learn how to refill the windscreen washer fluid on a Citroen C3 Picasso. Pull the plastic lever located at the bottom left of the dashboard, lift the front bonnet and secure it with the metal stay. Remove the cap, pour the washer fluid using a funnel and replace the cap on the reservoir. Close the bonnet after maintenance. Test the correct operation of the windscreen wipers by starting the engine and using the control levers. Clean the area under the windscreen if dirty.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Wiper of Citroen C3 Picasso
How to Remove the Rear Wiper of Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) By following these simple steps, you will see how to remove and replace the rear wiper of the Citroen C3 Picasso. First, move to the rear of the vehi…
Windscreen Wiper Blade Replacement
Windscreen Wiper Blade Replacement
Citroen C3 Picasso (2008-2017 / MK 1) This video tutorial explains how to replace the wiper blade on a Citroen C3 Picasso. First, secure the wiper arm so that the blades are raised, then …
How to Replace the Water Pump on a Citroen C3 Picasso 1.4 VTi
How to Replace the Water Pump on a Citroen C3 Picasso 1.4 VTi
Citroen C3 Picasso (2008-2017 / MK 1) This guide provides the main instructions for removing and replacing the water pump on a Citroen C3 Picasso 1.4 VTi. First, lift the vehicle and remo…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos