Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : Replacement fuel pump on Citroen C3 Pluriel

Citroen C3 - Video tutorial

Model: Citroen C3 FN, FC - Years 2002-2009
Part: Fuel pump
Operation: Replacement fuel pump on Citroen C3 Pluriel

Replacing the fuel pump on a Peugeot 206? Let's see how it disassembles from inside the tank. We remove the rear seats of the car. We disconnect the battery cables. With a socket wrench, unscrew the tightening screws of the metal cap (if present), remove it from its seat, cover the perimeter with absorbent paper to stop liquid leaks. Disconnect the power supply terminals and the liquid circulation tubes. We extract the fuel pump from its seat with attached pieces. We mount the new fuel pump (connect the power terminals). Let's test how it works.


Posted on 9 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • C3 2002-2009 - How much does it cost to replace the fuel pump on a Citroen C3? Read Answer
    • C3 2002-2009 - Where is the Citroà «n C3 diesel pump located? Read Answer
    • C3 2009-2016 - Where is the Citroen C3 fuel pump located? Read Answer
    • C3 2002-2009 - How many km to replace the diesel pump of the Citroen C3 1.4 HDi 70 Hp? Read Answer
    • C3 2002-2009 - Where is the Citroen C3 petrol float located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos