Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Window Regulator Motor on a Citroen C2

Model: Citroen C2 MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Power window motor

Video tutorial

Is the window regulator motor not working in your car? Let’s remove the door cover to access and replace it. Disconnect the battery terminals for safety. Remove the door panel, detach the connectors for the window lifters and speakers.

Now that the door panel is removed, peel off the adhesive cover (pull it off carefully). Identify the motor to be replaced (undo the securing screws located on the sides).

Replace the part and reassemble everything in reverse order. Refit all the cover pieces after securing the window regulator motor.

Turn on the ignition and test the window regulator motor.


Updated on 28 March 2026 by ScegliAuto


Related tutorials

How to replace the starter motor on a Citroën C2?
How to replace the starter motor on a Citroën C2?
Citroen C2 (2003-2010 / MK 1) To replace the starter motor on a Citroën C2, open the bonnet to access the components in the engine bay. On the right side, you will find the intake…
How to Replace the Starter Motor on the Citroen C2
How to Replace the Starter Motor on the Citroen C2
Citroen C2 (2003-2010 / MK 1) The instructions in this guide will show you how to remove and replace the starter motor on the Citroen C2. First, open the bonnet of the vehicle and…
Where Are the Fuses in the Citroën C2?
Where Are the Fuses in the Citroën C2?
Citroen C2 (2003-2010 / MK 1) The fuses in the Citroën C2 are located within the designated fuse boxes installed inside the vehicle: in this car model, there are two boxes. The fi…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos