Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Door Panel Citroen DS3

Model: Citroen Ds3 MK 1 - Years 2010-2019
Part: Door trim panel

In today's video tutorial, you will see how to remove the front door panel of a Citroen DS3. First, open the door and unscrew the screws located at the sides of the panel with a screwdriver: then remove the caps covering the Torx screws found in the door handle. Now remove the window switch panel by prying it off and disconnecting the electrical connector located at the back. At this point, you can start prying at the sides of the panel to release and remove it: finally, unclip the opening handle cable!

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Door Panel of the Citroen DS3
Removing the Door Panel of the Citroen DS3
Citroen Ds3 (2010-2019 / MK 1) Today's guide shows how to remove and replace the front door panel of the Citroen DS3, as well as the Citroen C3. First, open the front door and star…
How to remove the door panel of a 2010 Citroen DS3
How to remove the door panel of a 2010 Citroen DS3
Citroen Ds3 (2010-2019 / MK 1) Removing the front door panel of a Citroen DS3 is a simple task that anyone can do. As shown in the video, there are screws around the perimeter of t…
Where is the OBD2 port located in the Citroen DS3?
Where is the OBD2 port located in the Citroen DS3?
Citroen Ds3 (2010-2019 / MK 1) To easily locate the OBD2 port inside your Citroen DS3, you need to carefully follow the steps described below and apply them step by step. First of …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos