Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Air Filter on a Citroen C4

Model: Citroen C4 MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Air filter

See other generations:
Video tutorial

How do you remove the air filter from a Citroen C4? Let's look at removing the filter located in the engine bay. Open the engine bay and unscrew the securing screws of the plastic cover of the air filter using a screwdriver: pull the cover away from inside the engine bay. Remove the plastic cover and slide the air filter out of its housing as shown in the video.

Insert the new filter and reassemble all the components of the glove compartment as you disassembled them earlier.

Secure the plastic covers of the container, and screw the securing screws back in after replacement. Close the engine bay to finish.


Updated on 2 April 2026 by ScegliAuto


Related tutorials

How to Replace the EGR Valve on the Citroen C4 Diesel
How to Replace the EGR Valve on the Citroen C4 Diesel
Citroen C4 (2010-2018 / MK 2) Let's see how to replace the EGR valve on a Citroen C4 II diesel: open the bonnet and remove the engine cover, rotate the turbo air inlet duct, uncli…
Removing the Radio from a Citroen C4
Removing the Radio from a Citroen C4
Citroen C4 (2004-2010 / MK 1) In today's video tutorial, we will see how to remove the radio from a first-generation Citroen C4 in simple steps. First, get inside the car and inse…
Removing the External Wing Mirror on Citroen C4
Removing the External Wing Mirror on Citroen C4
Citroen C4 (2004-2010 / MK 1) In this video tutorial, you will find instructions for removing the external wing mirror on a first-generation Citroen C4 by following these simple s…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos