|
Do it yourself
| |||
| ||||
How to Replace the EGR Valve on the Citroen C4 Diesel
Model: Citroen C4
MK 2
- Years 2010-2018
Let's see how to replace the EGR valve on a Citroen C4 II diesel: open the bonnet and remove the engine cover, rotate the turbo air inlet duct, unclip the duct from the resonator by pressing on the tabs, disconnect the airflow meter connector; unscrew the two brake fluid reservoir screws (T20) and move it; disconnect the intake pipe by pressing it with a screwdriver, unscrew the two elastic supports of the airbox with a 13 mm spanner, and unscrew the three screws of the air filter flange to remove the airbox. Now we can see the EGR valve. Disconnect the electrical connector and remove the two T27 fastening screws, carefully remove the valve as it may be caked on: clean the duct of carbon deposits and replace the valve, which can be found on eBay with code 276304757834 for £64.33 with free delivery. Now reassemble the valve and then sequentially reattach all the components you previously removed.
Posted on 24 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Citroen C4
(2010-2018 /
MK 2)
Let's see how to change the EGR valve on a Citroen C4 II: first, it is always advisable to disconnect the negative terminal of the battery, although …
Citroen C4
(2014-2020 /
Cactus)
In this video, we see where the EOBD port of the Citroen C4 Cactus is located. The EOBD port (European On Board Diagnostic) originates from the bette…
Citroen C4
(2004-2010 /
MK 1)
When replacing the cylinder head gasket or carrying out a repair that involves the cylinder head, it is good practice to also replace the valve guide…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.095
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |