Do it yourself
Frequently asked questions about cars and motorcycles

Where is the EOBD port located on the Citroen C4 Cactus?

Model: Citroen C4 Cactus - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, we see where the EOBD port of the Citroen C4 Cactus is located. The EOBD port (European On Board Diagnostic) originates from the better known American OBDII, and is mandatory for gasoline vehicles M1 for registrations from January 1, 2001, and for diesel vehicles (always M1) for registrations from January 1, 2004. N1 diesel vehicles have had the obligation since January 1, 2007. The port, on the Citroen Cactus, is located on the left side of the vehicle: in the case of the video, it is a right-hand drive, so it is located under the glove compartment: in the case of left-hand drive, it is located between the steering wheel and the driver's door.


Posted on 20 May 2025 by ScegliAuto


Related tutorials

Citroen C4 (2014-2020 / Cactus) In this video, we will see how to replace the AdBlue sensor on a Citroen C4 Cactus: first, we need to lift the front part of the car. We would have p…
Citroen C4 (2014-2020 / Cactus) In this video, we see how to change the time on a Citroen C4 Cactus, an operation that we must do from the multimedia screen: we must go to the right…
Citroen C4 (2014-2020 / Cactus) To manually reset the service light on the instrument cluster of your Citroen C4 Cactus (2016 model), follow the procedure described in this guide. B…

Other guides you may be interested in

    Frequently Asked Questions

    • C4 2010-2018 - Why isn't the touch screen of the Citroen C4 working? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos